Manufacturing Tolerance - Bespoke rubber extrusion Profiles, manufacture&supplier--SEASHORERUBBER

Manufacturing Tolerance

The purpose of the subsequently compiled tolerances from there spective standard is to facilitate the quick assignment of tolerated dimensional deviations.

Not applicable to drawings with fixed tolerances.

Soild and soft rubber profiles(sections) based on DIN ISO 3302-1E2

Nominal range in mm			+/- mm
	≤	1.5	0.25
1.5	to	2.5	0.35
2.5	to	4	0.4
4	to	6.3	0.5
6.3	to	10	0.7
10	to	16	0.8
16	to	25	1
25	to	40	1.3
40	to	63	1.6
63	to	100	2

Sponge rubber profiles profiles(sections) based on DIN ISO 3302-1 E3

Nominal range in mm			+/- mm
	≤	6.3	0.5
6	to	10	0.7
10	to	16	0.8
16	to	25	1
25	to	40	1.3
40	to	63	1.6
63	to	100	2.0
100	to	160	2.5
160	to	63	1.5%

Toler for custom lengths(rubber) based on DIN ISO 3302-1 L3

Nominal range in mm			+/- mm
	≤	3	0.4
3	to	6	0.6
6	to	10	0.7
10	to	18	0.8
18	to	30	1
30	to	50	1.2
50	to	80	1.5
80	to	120	1.9
120	to	180	2.3
180	to	250	2.8
250	to	320	3.5
320			1.4%

Sponge rubber profiles profiles(sections) based on DIN ISO 3302-1 E3

Nominal range in mm +/- mm

≤ 1.5 0.4
1.5 to 2.5 0.5
2.5 to 4 0.7
4 to 6.3 0.8
6.3 to 10 1
10 to 16 1.3
16 to 25 1.6
25 to 40 2
40 to 63 2.5
63 to 100 3.2

Toler for custom lengths(rubber) based on DIN ISO 3302-1 L3

Nominal range in mm +/- mm

≤ 40 1.6
40 to 63 2
63 to 100 2.5
100 to 160 3.2
160 to 250 4
250 to 400 5
400 to 630 6.3
630 to 1000 10
1000 to 1600 12.5
1600 to 2500 16
2500 to 4000 20
4000 to
0.005

Toler for custom lengths(rubber) based on DIN ISO 3302-1 L3

Nominal range in mm +/- mm

≤ 400 5
400 to 1000 10
1000 to 2500 20
2500 to 6000 30
6000 to
2%

CONTACT US

COMPANY INFO

PRODUCTS

MESSAGE

Nominal range in mm			+/- mm
	≤	1.5	0.4
1.5	to	2.5	0.5
2.5	to	4	0.7
4	to	6.3	0.8
6.3	to	10	1
10	to	16	1.3
16	to	25	1.6
25	to	40	2
40	to	63	2.5
63	to	100	3.2

Nominal range in mm			+/- mm
	≤	40	1.6
40	to	63	2
63	to	100	2.5
100	to	160	3.2
160	to	250	4
250	to	400	5
400	to	630	6.3
630	to	1000	10
1000	to	1600	12.5
1600	to	2500	16
2500	to	4000	20
4000	to		0.005

Nominal range in mm			+/- mm
	≤	1.5	0.4
1.5	to	2.5	0.5
2.5	to	4	0.7
4	to	6.3	0.8
6.3	to	10	1
10	to	16	1.3
16	to	25	1.6
25	to	40	2
40	to	63	2.5
63	to	100	3.2

Nominal range in mm			+/- mm
	≤	1.5	0.4
1.5	to	2.5	0.5
2.5	to	4	0.7
4	to	6.3	0.8
6.3	to	10	1
10	to	16	1.3
16	to	25	1.6
25	to	40	2
40	to	63	2.5
63	to	100	3.2