Subscriptions

Get mail on new products
Name:
Company:
E-mail:
Silicone Rubber Extrusions:
 
Our capabilities:
 
Peroxide and platinum cured polymers, both of which can meet food quality requirements.
Hardness range: 35-85 Shore A
 
Colours available:
 
Translucent
White
Black
Grey
Red oxide
Bright red
Green
Yellow
Blue
 
Colour matching available on request.

Drawings:
 
Please click following links for the drawings of our stocked silicone extrusion profiles.

drawing 1 to 4.
drawing 5 to 8.
drawing 9 to 12.
drawing 13 to 15

Temperature resistance:
 
-50 to +260 Degrees Centigrade (up to 300C for short periods)
 
Sizes available:
 
Flat strips are available in continuous lengths up to 80mm wide. Minimum thickness 0.5mm.
Cords and tubes are available up to 60mm Diameter. Minimum tube ID is 1mm
 
Joining:

Most profiles can be joined to form endless seals.
Hollow and solid O rings are available in a wide range of sizes.
Most profiles can be joined to any required angle to form (for example) rectangular gaskets.
 

 
Silicone Extrusion Tubing:       
 
Both peroxide-cured high quality silicone tubing,colour available are clear,white,red,bule,black etc,so many per your request.
 
Minimum inner diameter:1mm
 
Maximum outer diameter:60mm   all the sizes in this scope are
 
The specification of most standard silicone tubing we produce are as below:
 
Density:1.25 g/cm3
Handness:55 Shore A
Tensile strength:7.0 mpa
Elongation at Breakage:320%
Tension Set:8%
Tear Strength:20 KN/M 
Heat Resistant: 200 C
 
The standard silicone tubing is industrial, food grade(FDA approved),medical grade,high tear silicone tubing is also available.