General silicone rubber sheet
Clour availableis white, translucent, red oxide and black
The specification of most standard silicone sheet we produce are as below:
Density:1.25 g/cm3
Handness:55 Shore A
Tensile strength:7.0 mpa
Elongation at Breakage:320%
Tension Set:8%
Tear Strength:20 KN/M
Heat Resistant: 200 C
Width:1m,1.2m,1.5m,1.8m,2.0m, thinkness from 0.1mm to 10mm
The above is silicone rubber sheet standard at Shore A Hardness 40 to 60. Other sizes, colours and hardnesses are available on request.
Beside standard ones,we supply FDA food grade silicone sheet,anti-static silicone sheet,anti-acid silicone sheet.

Solar laminator special silicon sheet

     Seashore uses qualified raw material of a world-famous brand for the high tear-resistant silicon rubber sheet and carries out technical cooperation with professional companies domestically and abroad. Seashore adopts advanced techniques and special equipment, large drum-type vulcanization unit, in the development of the product, which has a high level of stability, a good evenness and reliability. Specially used for solar energy laminator, etc. According to specific working conditions andlose-efficacy forms of solar laminated sheet, Second generation silicone rubber sheet,based on the former silicone rubber sheet, this one brings in the green environmentalreinforcing material which is acid resistant, chemical resistant, high temperature resistant，so the tensile strength, tearing strength, and dimensional stability of the silicone rubber sheet are greatly improved, then the lifetime is longer. The advantage of the silicone rubber sheet is that even if it is used to the extreme, the solar module will not be damaged.

    The third generation silicone rubber sheet has great improvement on the chemical resistant andageing resistant property, especially on the high resistance to the EVA volatile matter, then the lifetime can be longer.

    Recently, fourth generation of laminating machine for sealing plastic sheet - fluoride silica gel plate was developed. The new silica gel plates in the original high temperature, low modulus, elastic deformation, elastic recovery, good, based on silica gel plate to overcome the past intolerance acidic media (especially volatile EVA), after some time made use of hard, brittle hair fatal weakness. Because of its inert surface, it has good stain resistance, easy cleaning, so it has better performance and longer service life (three times)

Model	First generation  SS1100	Second generation SS2100	Third  generation SS3100	Fourth generation SS4100
Hardness(Shore A)	70±2	70±2	70±3	68~73 Shore A  (working surface) 63~68 Shore A  (buffering surface)
Tensile strength Mpa ≥	9.5	12.5	15	10.2
Tearing strength N/mm ≥	42	48	40	45
Long run temperature℃	230	250	170	230
Resistant to EVA (compare)	Weak	Middle	Strong	Super
Normal using life (times)	＞1500	＞2500	＞3500	＞4000
Appearance and color	Transparent,One side   smooth One side cloth grain /Two  sides smooth	Black color/grey color,   two sides smooth	Black color, One side  smooth One side cloth grain/two  sides smooth	Black - Grey
Remarks	1.      Other colors can be customized 2.     The maximum width can be 3800mm without joint.

General silicone rubber sheet
Special silicon sheet glass industry according to the market demand is our company specially for glass vacuum nip glue furnace supporting key components.
Glass vacuum nip glue furnace is adopted vacuum principle, make vitreous under vacuum conditions, using atmospheric pressure to heat the glass vacuum bag pressure to eliminate air and unable to have a bubble, vacuum bags on the edge of the vacuum heating conditions, will be two or several pieces of glass and EVA (or other film) thermal bonding together of the special equipment.
Vacuum bag is glass vacuum nip glue furnace, he has the core component, two pieces of silicon sheet and abnormity silica gel sealers composition, silicon sheet is whole sets of laminated furnace, the quality of key components in a direct influence on the glass product quality.

model	Tensile strength （Mpa）	Tear strength （N/mm）	hardness (Tsou A)	Break elongation（%）	color	form
SS3111	6.5	26	55±5	450	transparent	double-ray
SS3112	6.5	26	55±5	450	transparent	A light a cloth grain
SS3121	6.5	26	55±5	450	rust	double-ray
SS3122	6.5	26	55+5	450	rust	A light a cloth grain
SS3211	8.0	32	55±5	650	ransparent	double-ray
SS3212	8.0	32	55±5	650	ransparent	A light a cloth grain
SS3221	8.0	32	55±5	650	rust	double-ray
SS3222	8.0	32	55±5	650	rust	A light a cloth grain

Silicon sheet for vacuum film machine
Vacuum film machine use silicon sheet is our company according to the market need for vacuum pipelines laminating machine specially designed the complete production.
vacuum film machine use silicon sheet is vacuum membrane machine key components, it will have a direct impact on the skin effect and to the use of laminating machine costs.
Our company produces the vacuum film machine silicon sheet is, use Germany imports of raw materials, coupled with superb production technology and advanced technology and equipment, the product has high temperature resistant, strong toughness, ageing resistance, corrosion resistance, high elastic, avirulent insipidity non-polluting, and surface inert not contamination, is vacuum film machine most ideal elastic offset.

Specific performance parameters are as follows:

Model	Tensile strength （Mpa）	Tear strength （N/mm）	Hardness （Tsou A）	Break elongation（%）	Color	Form
SS2111	6.5	26	60~75	450	White and transparent	Double-ray
SS2211	90	32	50~70	650	Gray transparent	Double-ray

Note: common specification: 2 * 3 * * 2750, 1350 16 * 3000, special specification can be customized.